Mobile Crossing BLUETOOTH GPS Guía de usuario descargar pdf (Pagina 6)

Bluetooth connection

Bluetooth connectionBluetooth connection

PDA users

PDA usersPDA users

then the unit can be installed in any location where the antenna

cable will reach and the power switch can be accessed.

It is possible to leave this unit on all of the time if a permanent

source of external power is provided. Some accessory outlets are

live all of the time and can be used for this purpose. Many outlets

turn off when the car ignition is turned off. The unit will revert to the

battery under these conditions which will continue to supply power

for up to 8 hours for continuous service. However, running the

battery down over and over will shorten the life of the battery so this

mode is not recommended in lieu of turning the unit off. If you plan

to leave the unit on be sure and provide uninterrupted power. Do not

cut the power cord and wire it to the battery. The plug contains a

regulator to reduce the battery voltage from 12 Volts down to 5

Volts. Hooking 12 Volts directly to the unit will destroy it.

Bluetooth connection

This unit requires a serial Bluetooth connection. While not required,

in some instances the Bluetooth interface will be more solid if the

two units are bonded or paired together. This pairing requires a

passkey for access. The Bluetooth GPS receiver supports a

passkey of ‘2003’. This number can be entered if the program asks

for a passkey.

PDA users

The unit needs serial port support from the Bluetooth device on your

PDA. If your PDA came with Bluetooth hardware installed, you will

have this service. If you purchase a Bluetooth radio to install in your

PDA be sure that this is a feature of the product and that you install

and configure serial port support.

Pocket PC users will find the GPS located on the outgoing serial

ports defined by the Bluetooth radio. The Bluetooth driver should

disable serial port protocol since the Bluetooth GPS uses a simple

interface and some programs can be confused by this protocol.

Palm users will need to verify that the application they intend to use

supports Bluetooth communication.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Sin comentarios

Mobile Crossing BLUETOOTH GPS Guía de usuario Pagina 6